New heating systems for Lerwick business premises
New heating for Lerwick business premises should suit the space: office radiators and warehouse radiant heaters serve different needs. Explain building use before comparing proposals.
Business Boilers can share your project with up to four independent commercial heating installers. Replies depend on contractors' workload around Lerwick. There is no cost or obligation in asking.
What a full heating installation involves
A full system covers heat generation, distribution and delivery. Boilers or heat pumps produce the heat; insulated pipework and pumps carry it; emitters release it into each area; controls decide when and where. The installation finishes only when the system has been flushed, treated, balanced and handed over with manuals and training.
Typical heating installation projects
Describe the building, how it will be used and any deadlines.
- Shell-and-core offices or retail units being fitted out.
- Warehouses or factories that need heating for working areas.
- Refurbishments that strip out corroded or obsolete pipework.
- Reconfigured layouts leaving emitters in the wrong places.
- Buildings preparing for heat pumps and lower flow temperatures.
Agree the room loads and controls together
The emitter schedule should show the heat required in each space at the selected water temperature. Office radiators, fan convectors and warehouse radiant units have different design needs. Decide how zones follow occupied hours, how controls connect to the BMS and whether separate tenants need heat metering.
From design to commissioning
Ask how the stages fit around building occupation.
- Calculate heat loss, select emitters, size pipework and design controls and zoning.
- Confirm the design, phasing plan and approvals before work starts.
- Run and insulate first-fix pipework, sealing any penetrations through fire-rated walls.
- Install plant room equipment — boilers or heat pumps, pumps, pressurisation and controls.
- Connect radiators, fan convectors, underfloor manifolds or radiant units.
- Fill, flush, treat, commission and balance the system.
- Hand over manuals, commissioning records and controls training.
Questions for the designer
Ask which emitter types suit each area: radiant heating for high warehouses, fan convectors for open-plan offices, radiators for cellular rooms. Discuss zoning for areas used at different times, and whether tenants need separate metering. Consider designing for lower flow temperatures so a heat pump could be added later. Check how the work will be phased if the building stays occupied.
Guide prices for Lerwick heating projects
This site uses an indicative range of £12,000–£100,000. Large or complex buildings can exceed it.
A small office or clinic with radiators and a modest boiler cascade sits towards the lower end. Multi-floor offices, schools and large industrial units with complex zoning, BMS controls and long pipework runs sit at the top or beyond. Builder's work and ceiling reinstatement are often extra.
Commercial prices are generally quoted excluding VAT. The site guide is 2–8 weeks on site, plus design time.
Information to share early
Attach floor plans with room uses, ceiling heights and any M&E specification or landlord's fit-out guide. Describe occupied hours, areas used at different times, any high-ventilation spaces such as kitchens or loading bays, and whether a building management system exists or is planned. State any completion deadline.
Regulations, approvals and consent
New heating systems in non-domestic buildings must meet the efficiency, controls and commissioning requirements of Approved Document L in England, or the equivalent rules elsewhere in the UK. Where Gas Safe registration is required, gas work needs engineers with the matching fuel and non-domestic categories — check on the Gas Safe Register. Pipework through fire compartment walls must be properly fire-stopped.
For planning or listed building questions about new plant or flues, contact Shetland Islands Council. Check consent before ordering plant.
For gas work in offices, shops, schools and similar premises, check the attending engineer on the Gas Safe Register. Their current qualifications must cover the fuel, appliance and work involved; domestic registration alone does not cover non-domestic appliances. Some industrial premises fall under different provisions: the HSE guidance for employers explains where a competent person is required. Ask the contractor to confirm which rules apply to your building. Water-side work and controls also need appropriate competence, but do not all require gas registration.
Heating installers around Lerwick
You can also enquire for premises in these nearby areas: Benbecula, Brae, Castlebay, Lochboisdale, Scalloway, Stornoway, Sullom Voe. Describe the working areas and installation programme. Contractors choose their own coverage across Shetland Islands.
Start your Lerwick heating project enquiry
Start a free enquiry with your site postcode. Installers covering Lerwick who respond prepare their own designs and prices. Contractors joining are asked for insurance details and references; check their certificates, gas categories and completed projects yourself. Agree any design fee upfront.
Before you commission a new system
These cover common questions about new commercial heating.
How much does commercial heating system installation cost in Lerwick?
The indicative guide on this site is £12,000–£100,000. Floor area, emitter type, pipework, zoning, controls and phasing all affect the price. Agree the full scope and total, including VAT, before ordering.
What heating suits a warehouse or workshop?
Radiant heaters or warm air heaters usually suit high-ceilinged spaces, because they heat people and working areas rather than the air under the roof.
Can the building stay open during the installation?
Often, yes, with phased working zone by zone or out of hours. The programme will be longer and out-of-hours premiums may apply.
Should the system be designed for a future heat pump?
It is worth considering. Sizing emitters and pipework for lower flow temperatures makes a later switch to a heat pump much easier.
Will four installers quote in Lerwick?
Not always. We can look for up to four, but replies depend on availability and the size of the project in Lerwick. You may get fewer or none, and you never have to accept a quote.
What access details should I provide for commercial heating system installation in Lerwick?
Request flushing and treatment records, hydraulic balancing results and a demonstration of time schedules and temperature controls. Include insulation, fire stopping and making good floors or ceilings in the scope. Any future heat-pump provision needs compatible emitters and controls, not just spare plant room space.